Real stuff | 3D printing digital dental products application

Do you know how 3D printing is applied in the digital dental solution?


Do you know about LCD dental application 3D printing technology?


Do you know 3DTALK DS200 dental special 3D printer?


If you are interested on the above questions,


Then


Kindly follow me to find out about it.


LCD Dental Printer Application (Promotion)

Why choose 3D printers in digital dental solution?

As we all know, in the traditional process of making dental molds, from taking out of the dental impression to the gypsum infusion to make the dental mold, the experience brought to the customer is not good and also the precision can not be guaranteed. The production process always generate a lot of dust and noise pollution, so as a result, more and more dental lab are beginning to look for ways to digitize and use cleaner, quieter, more efficient production tools to replace traditional dental mold making processes.

During the process of digital dental solution, CNC digital processing was firstly recognized and applied. It is a kind of reduced material manufacturing mode. Current now it has been widely used in the production of dental molds, especially in crown and veneer repair, the zirconium dioxide zirconium block is cut by computer to obtain accurate crown and veneer sheets, and can be produced in small batches. However, the CNC is very slow and can cause a lot of material waste and increase the cost of denture processing. During the use of the CNC, frequent maintenance and replacement of consumables, such as drill bits, belts and dust cleaning equipment are required. 3D printing technology does not have these limitations, so small batch production through 3D printing technology has also become the first choice for many digital technicians. Meanwhile, 3D printing cannot only be used for small batch production, but also provides new fast and convenient manufacturing methods in the development of new services such as planting guides and orthodontics.

According to the survey, after using the digital scanning and 3D printing in the digital whole process, the dentist barely need to adjust the wearing of the teeth, and the crown rework rate produced by the processing factory is reduced from 5% to 1%. More and more dental processing plants use machine production instead of manual operation, so the lead of the dental equipment also reflects the production level of the factory to a certain extent.

Dental digitization is a big trend. 3D printer as an indispensable part of digital dental solution has enjoyed a wide recognition by dental practitioners, and the penetration rate is increasing year by year.


Why choose LCD 3D dental Printer?

There are three main types of 3D printing technology in dental printing applications:


Forming methodSpeedEquipment cost


LCD

MiddleHighSmall batch production such as orthodontics, repair, and guide plates
Surface curingFastHighSLABigLowOrthodontic model mass production


Among the three molding technologies, LCD and DLP are the most widely used, from orthodontic to repair, to guides, casting and other product applications. DLP can achieve comparative accuracy in small size, but the printing accuracy will be decreased when the printing size is increased, or the printer cost will rise sharply. The LCD printer not only can achieve high precision and large size, but also has great advantages in small batch production.

On the imaging hardware device, the core component is the DLP chip, which belongs to high-precision components and has long been monopolized by TI with high cost. The correction algorithm for image distortion is only in the hands of a few suppliers, and the cost of equipment is therefore high. The LCD molding method, the core components are common LCD screens on the market, with low cost, good consistency and no distortion of images. With the development of technology, 2K, 4K and even 8K resolution screens have been commercialized. With the same precision, the LCD's molding area can be 2.8 times bigger than DLP model, while the cost is less than 50%. The use of LCD models can effectively reduce the production costs of dental processing lab and dentists.

Why choose 3DTALK DS200?

There are many low-cost LCD printers on the market, mainly used to print anime models or jewelry. Can they be used to print dental molds? The answer is no. This type of machine is usually assembled with simple LCD components, and with the cheap screw and light source, it can basically be imaged, but the precision is not guaranteed, and it is impossible to achieve stable production.

Based on the current market conditions and the professional dental market, let's introduce you to a special dental LCD 3D printing product from the 3DTALK brand - DS200 series.

Printing accuracy

The printing accuracy depends on the hardware level, the quality of the light source, and the resin. From the structural point of view, the key components of DS200 printer are made of high-standard ones from well-known manufacturers, such as ball screws and guide rails. The structure is designed with high strength hard alumina fittings. Therefore, DS200 series printer has very good performance both in terms of product quality and structural stability. It is impeccable.

DS200 series printer is supplied with series of dental resins, which are developed by its own team. 3DTALK Dental Resins currently cover repair, orthodontics, guide plates, casting. They are of high precision, good mechanical properties and can highly match with DS200 series printer. 3DTALK dental guide plate resin is one of the few materials in China that can be directly sterilized by high temperature and high pressure. The biggest benefit is that the DS200 resin is environmentally friendly and has no irritating odor. It will not cause dizziness to human after a long time operation.

Powerful typesetting software

Automatic typesetting

Quickly typing a large number of dental models, which simplifies the cumbersome operation, save the typesetting time, and only need to deal with the individual unreasonable models separately. The software supports nested placement, which makes full use of the print space for the shape of the dental models and increase productivity and efficiency.

Hollow model + Vent Design

3DTALK DS200 professional dental typesetting software not only supports automatic typesetting, but also integrates many basic design functions necessary for dental application, such as model hollowing and vent design. This function is very convenient for the operator in the processing of the model through the engraving process and vent design, meanwhile it can also greatly reduce the material consumption and maximize the strength of the model.





Pay attention to what you have not paid attention to !

3DTALK

Tel:0513-85632888
E-mail:info@ouring.com.cn
Address:Tianan Cyber Park, No.8 building, Gangzha District, Nantong City, Jiangsu, China.